MáyBơmNước.net - máy bơm và thiết bị xử lý nước sạch

558 đường Trường Chinh, Hà Nội. Điện thoại: (04)-35630150.
Hot line: 0903238126 - Email: contact@maybomnuoc.net

MayBomNuoc.net - Cung cấp máy bơm gia dụng, công nghiệp và các thiết bị xử lý nước

Bơm Pedrollo arrow Pedrollo-PV
Pedrollo-PQAPentax-4CA

Pedrollo-PV
Xem hình đầy đủ


Pedrollo-PV

Giá: Liên hệ để biết giá


[ Hướng dẫn thanh toán ]


Bạn muốn biết thêm thông tin về sản phẩm?



PV Peripheral Pump Range General Product Description

 
 

PERFORMANCE RANGE

Flow rate up to 10 L/min (0.6 m³/hr)
Dynamic head up to 55m

OPERATING LIMITS

Suction lift up to 8m
Fluid temperature up to + 90°C
Maximum ambient temperature + 40°C

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles, and fluids which are
not chemically aggressive to the pump components.

THE HYDRAULIC PERFORMANCE OF THIS STURDY AND COMPACT BRASS PUMP MAKES THEM IDEALLY SUITED FOR TRANSFERRING LIQUIDS IN THE MECHANICAL PROCESSING SECTOR, FOR CONTROLLING THE TEMPERATURE OF MOULDS, COOLING, CONDITIONING AND FOR BEVERAGE DISPENSING MACHINES.

This particularly compact pump reaches high performances from very low motor powers and is therefore suitable for cooling welding torches.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The PV pump is designed to suit a wide range of applications, with features including:

  • Anti-seize, brass pump head suitable for industrial use.
  • High heads achieved from low motor powers.
  • Small variations in delivery rates in the event of changes in the pressure demand;
  • High tolerance to entrained air in the pumped liquid

STRUCTURAL CHARACTERISTICS

  • Brass PUMP BODY, with UNI ISO 228/1 1/4" threaded suction and delivery ports
  • Aluminum MOTOR BRACKET with brass insert (patented).
  • BRASS IMPELLER, with radial peripheral blades, floating on the shaft
  • EN 10088-3-1.4104 stainless steel MOTOR SHAFT

  • MECHANICAL SEAL: ceramic - carbon - EPDM

    MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with structural shape, suitable for continuous duty. INSULATION class F.
    A thermal cutout device (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector complying with current standards

  • PROTECTION IP 44.
  • CONSTRUCTION AND SAFETY STANDARDS complies with EN60034-1, IEC 34-1, CEI 2-3
  • REGISTERED MODEL

*Installations must comply to Water Bye-laws in the UK.

PERFORMANCE CURVE

Pedrollo PV Peripheral water pump curve

PERFORMANCE DATA
Performance Data Pedrollo PV Peripheral Pump

PRODUCT DIMENSIONS

Dimensions of Pedrollo PV Peripheral Pump







Lượt truy cập

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterHôm nay132
mod_vvisit_counterHôm qua187
mod_vvisit_counterTuần này1036
mod_vvisit_counterTháng này3179
mod_vvisit_counterTất cả792351
Phần mềm ôn thi lý thuyết lái xe ô tô, luật giao thông đường bộ trên Android

Hỗ trợ thanh toán