Pedrollo-PQ3000

PQ3000 Side Suction Peripheral Pump Range General Product Description

PERFORMANCE RANGE

Flow rate up to 50 L/min (3 m³/hr)
Dynamic head up to 180m

OPERATING LIMITS

Suction lift up to 8m
Fluid temperature up to + 90°C
Maximum ambient temperature + 40°C

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.

RELIABLE, ECONOMICAL AND SIMPLE TO USE, THEY ARE SUITABLE FOR INDUSTRIAL APPLICATIONS.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The various models in the PQ series are designed to suit a wide range of applications, with features including:

• high heads achieved from low motor powers.
• small variations in delivery rates in the event of changes in the pressure demand;
• high tolerance to entrained air in the pumped liquid

STRUCTURAL CHARACTERISTICS

• Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports
• PUMP BODY COVER: brass with front shim disk in stainless steel
• Aluminum MOTOR BRACKET with brass insert (patented), reducing difficulties when starting the pump after long periods without use.
• BRONZE IMPELLER, with radial peripheral blades, floating on the shaft
• AISI 316 stainless steel MOTOR SHAFT (AISI 416 up to 0.75 kW)
• MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor, which is quiet running, closed and externally ventilated, with structural shape, suitable for continuous duty. 3 Phase 230/400V - 50 Hz
• INSULATION class H
  A thermal cutout device (motor protector) is incorporated in single phase motors.
  Three phase motors require an adequate external motor protector complying with current standards
• PROTECTION IP 55.
• CONSTRUCTION AND SAFETY STANDARDS: complies with EN 60 335 -1, CEI 61-150), EN60034-1), (IEC 34-1, CEI 2-3)
  

  PERFORMANCE CURVE

  

  PERFORMANCE DATA
  

  PRODUCT DIMENSIONS