MáyBơmNước.net - máy bơm và thiết bị xử lý nước sạch

558 đường Trường Chinh, Hà Nội. Điện thoại: (04)-35630150.
Hot line: 0903238126 - Email: contact@maybomnuoc.net

MayBomNuoc.net - Cung cấp máy bơm gia dụng, công nghiệp và các thiết bị xử lý nước

Bơm Pedrollo arrow Pedrollo-JSW1
Pedrollo-HF(High Flow)Pedrollo-JSW2

Pedrollo-JSW1
Xem hình đầy đủ


Pedrollo-JSW1

Giá: Liên hệ để biết giá


[ Hướng dẫn thanh toán ]


Bạn muốn biết thêm thông tin về sản phẩm?



JSW1 Self Priming Jet Pump Range General Product Description

 
 

PERFORMANCE RANGE

Flow rate up to 50 L/min (3.0 m³/hr)
Dynamic head up to 47 m

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water and fluids which are not chemically aggressive to the pump components.

THEY ARE EXTREMELY RELIABLE, ECONOMICAL AND SIMPLE TO USE, BEING PARTICULARLY SUITABLE FOR DOMESTRIC APPLICATIONS SUCH AS THE AUTOMATIC DISTRIBUTION OF WATER FROM SMALL AND MEDIUM-SIZED SURGE TANKS, WATERING GARDENS, ETC.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The wide range of pumps in the JSW series suit a variety of applications.

  • high heads with respect to power requirements;
  • flat operating and power absorption curves, giving moderate curve variations with respect to large variations in delivery demand;
  • high tolerance of the presence of entrained air in the pumped liquid;
  • suction capacities up to 9 meters.

Curve tolerance according to ISO 2548.

STRUCTURAL CHARACTERISTICS

  • Cast iron PUMP BODY with UNI ISO 228/1 gas threaded suction and delivery ports, threaded side openings for installing a pressure gauge and pressure switch.
  • Pump BACKPLATE in AISI 304 Stainless Steel (Cast Iron on JSW 3 models)
  • General Electric® Noryl® GFN2V technopolymer EJECTOR UNIT (approved for drinking water).
  • BRASS IMPELLER centrifugal radial flow type.
  • AISI 416 stainless steel MOTOR SHAFT (AISI 316 on JSW 3 models, optional on others)
  • Ceramic and graphite MECHANICAL SEAL.
  • MOTOR: the pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size which is quiet running, closed and externally ventilated, suitable for continuous duty. INSULATION class F (Class B below 0.75kW).
    A thermal cutout device (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector connected according to current standards.

  • PROTECTION IP 44.
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335-1 (IEC 335-1, CEI 61-150) EN 60034-1 (IEC 34-1, CEI 2-3).
  • REGISTERED MODEL.

NOTE: It is always advisable to install a foot valve on installations that involve a suction lift.

PERFORMANCE CURVE

PERFORMANCE DATA

PRODUCT DIMENSIONS







Lượt truy cập

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterHôm nay33
mod_vvisit_counterHôm qua80
mod_vvisit_counterTuần này552
mod_vvisit_counterTháng này2816
mod_vvisit_counterTất cả791988
Phần mềm ôn thi lý thuyết lái xe ô tô, luật giao thông đường bộ trên Android

Hỗ trợ thanh toán