MáyBơmNước.net - máy bơm và thiết bị xử lý nước sạch

558 đường Trường Chinh, Hà Nội. Điện thoại: (04)-35630150.
Hot line: 0903238126 - Email: contact@maybomnuoc.net

MayBomNuoc.net - Cung cấp máy bơm gia dụng, công nghiệp và các thiết bị xử lý nước

Bơm Pedrollo arrow Pedrollo-CP25
Pedrollo-CP220/230/250Pedrollo-F Series

Pedrollo-CP25
Xem hình đầy đủ


Pedrollo-CP25

Giá: Liên hệ để biết giá


[ Hướng dẫn thanh toán ]


Bạn muốn biết thêm thông tin về sản phẩm?



CP25 Standardized Centrifugal Pump Range General Product Description

 
 

PERFORMANCE RANGE

Flow rate up to 250 L/min (15 m³/hr)
Dynamic head up to 61 m

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water and fluids which are not chemically aggressive to the pump components.

THIS SERIES OF PUMPS HAS BEEN SPECIFICALLY DESIGNED FOR INDUSTRIAL OR AGRICULTURAL USE, WHERE THEIR CHARACTERISTIC STRENGTH AND RELIABILITY CAN BE FULLY UTILIZED.

Built according to EN 733 - DIN 24255, these pumps have standard overall dimensions, sizes and positioning of the delivery and suction ports, support base and other dimensions. This means that the pumps chosen will be adequately designed to handle heavy-duty operation and can be interchanged with other standardized pumps.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

A wide range of pumps make up the standardized CP series, enabling the most suitable model for a particular application to be chosen. This means high performance, coupled with reduced running costs, particularly important for powerful machines, often intended for continuous use. When developing individual models care was taken to aim at standardizing the following features within the series.

  • Long flat performance curves;
  • flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use;
  • good suction capacities both at low and high delivery rates

Curve tolerance according to ISO 2548.

STRUCTURAL CHARACTERISTICS

  • Cast iron PUMP BODY built according to EN 733 - DIN 24255 and UNI 7467 - NF E-44-111 with UNI ISO 228/1 gas threaded suction and delivery ports
  • BRASS IMPELLER, centrifugal radial flow type.
  • AISI 316 stainless steel MOTOR SHAFT.
  • Ceramic and graphite MECHANICAL SEAL
  • MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size, which is quiet running, closed and externally ventilated, suitable for continuous duty. INSULATION class F.
    A thermal cut-out device (motor protector) is incorporated in single phase motors up to 1.5 kW.

Other single phase motors and all three phase motors require an adequate external motor protector, connected according to current standards

  • PROTECTION IP 44.
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)

 

PERFORMANCE CURVE

PERFORMANCE DATA

PRODUCT DIMENSIONS







Lượt truy cập

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterHôm nay101
mod_vvisit_counterHôm qua103
mod_vvisit_counterTuần này851
mod_vvisit_counterTháng này2244
mod_vvisit_counterTất cả791416
Phần mềm ôn thi lý thuyết lái xe ô tô, luật giao thông đường bộ trên Android

Hỗ trợ thanh toán