MáyBơmNước.net - máy bơm và thiết bị xử lý nước sạch

558 đường Trường Chinh, Hà Nội. Điện thoại: (04)-35630150.
Hot line: 0903238126 - Email: contact@maybomnuoc.net

MayBomNuoc.net - Cung cấp máy bơm gia dụng, công nghiệp và các thiết bị xử lý nước

Bơm Pedrollo arrow Pedrollo-CP
Pedrollo-CKPedrollo-CP220/230/250

Pedrollo-CP
Xem hình đầy đủ


Pedrollo-CP

Giá: Liên hệ để biết giá


[ Hướng dẫn thanh toán ]


Bạn muốn biết thêm thông tin về sản phẩm?



CP Centrifugal Pump Range General Product Description

 
 

PERFORMANCE RANGE

Flow rate up to 160 L/min (59.6 m³/hr)
Dynamic head up to 58 m

PUMP INSTALLATION AND APPLICATIONS

These pumps are suitable for handling clean water not containing abrasive particles and fluids which are not chemically aggressive to the pump components.

THEY ARE EXTREMELY RELIABLE, SIMPLE TO USE, QUIET AND VIRTUALLY MAINTENANCE FREE, FINDING MANY USES IN DOMESTIC & INDUSTRIAL APPLICATIONS, e.g. AUTOMATIC DISTRIBUTION OF WATER FROM TANKS, PRESSURIZATION, TRANSFERRING WATER, WATERING GARDENS, ETC.

These pumps should be installed in a covered area, protected against the weather.

PERFORMANCE

The range of pumps in the CP series has been designed to suit a wide variety of applications, with features such as:

  • Steady performance even under varying conditions
  • flat absorption curves at high delivery rates, preventing motor overloading even during prolonged use;
  • good suction capacities both at low and high delivery rates

Curve tolerance according to ISO 2548.

STRUCTURAL CHARACTERISTICS

  • Cast iron PUMP BODY, with UNI ISO 228/1 gas threaded suction and delivery ports
  • AISI 304 stainless steel backplate, cast iron on more powerful models.
  • BRASS IMPELLER, centrifugal radial flow type (technopolymer impeller on request).
  • AISI 316 stainless steel MOTOR SHAFT. (AISI 416 up to 0.75 kW).
  • Ceramic and graphite MECHANICAL SEAL (other options available)
  • MOTOR: pumps are coupled directly to an asynchronous, high efficiency PEDROLLO induction motor of suitable size, which is quiet running, closed and externally ventilated, suitable for continuous duty. INSULATION class F (B up to 0.75 kW).
    A thermal cutout device (motor protector) is incorporated in single phase motors.

Three phase motors require an adequate external motor protector connected in compliance with current standards

  • PROTECTION IP 44.
  • CONSTRUCTION AND SAFETY STANDARDS in compliance with EN 60 335 -1, CEI 61-150), EN 60034-1), (IEC 34-1, CEI 2-3)
  • REGISTERED MODEL

*Installations must comply to Water Bye-laws in the UK.

PERFORMANCE CURVE

PERFORMANCE DATA

PRODUCT DIMENSIONS







Lượt truy cập

mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterHôm nay33
mod_vvisit_counterHôm qua514
mod_vvisit_counterTuần này3251
mod_vvisit_counterTháng này6364
mod_vvisit_counterTất cả847153
Phần mềm ôn thi lý thuyết lái xe ô tô, luật giao thông đường bộ trên Android

Hỗ trợ thanh toán